VALERII S&M GROUP PREMIUM 0503GX-EID043, Руководство пользователя

Страница: 4 / 37

1.18. Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing the power drill. Such preventive safety measures reduce the risk of starting
the power drill accidentally.
1.19. Store out of the reach of children and do not allow persons unfamiliar with the power drill or
these instructions to operate the power drill. The power drill is dangerous in the hands of untrained
users.
1.20. Use the power drill in accordance with these instructions and in the manner intended for the
power drill, taking into account the working conditions and the work to be performed.
1.21. Use of the power drill for operations different from intended could result in a hazardous
situation.
1.22. Have your power drill serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power drill is maintained.
1.23. This machine is designed for sanding and polishing only.
1.24. This machine is not suitable for operations such as grinding, cutting, wire brush, etc.
1.25. Inspect the machine and the accessories before each use. Do not use accessories which are
bent, cracked, or otherwise damaged. If the machine or one of the accessories is dropped, inspect
the machine or the accessory for damage. If necessary, replace the accessory.
1.26. Let the machine run with no load for no less than 1 minute in a safe area after mounting the
accessories. If the machine vibrates strongly, immediately switch off the machine, remove the plug
from the mains, and try to solve the problem.
1.27. Ensure that the polisher disk is properly tightened before operating the machine. Check that the
work-piece is properly supported or fixed.
1.28. Do not attempt to bring the polisher disk to a standstill with your hand.
1.29. Never put the power drill down until it has come to a complete stop and is switched off.
2. SAFETY STICKERS AND EXPLANATIONS:
A Class II or double insulated electrical appliance is one which has been designed in such a way that it does not require a s afety
connection to electrical earth. The basic requirement is that no single failure can result in dangerous volt-age becoming exposed so
that it might cause an electric shock and that this is achieved with-out relying on an earthed metal casing. This is usually achieved at
least in part by having two layers of insulating material surrounding live parts or by using reinforced insulation .