Проверил: Р.Ч./24.03.2015г
2
- Warning!
- Do not use in rain or wet
conditions.
- Read the instruction manual
before use
- Always wear eye protection,
muffler and helmet.
General Safety Instructions
·
Warning!
Read all safety warning and all instructions, failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed
below refers to your battery operated (cordless) power tool.
·
Carefully observe the instructions in this manual to reduce the risk of personal injury or material
damage.
·
Before operating the tool , make sure that you know how to switch the tool off in an emergency .
1) Work area
a) Keep work area clean and bright.
Using the power tool in cluttered and dark areas may result in
injuries.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
The Power tools may create sparks, which will ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you
to lose control.
2) Electrical safety
a) Avoid body contact with the earthed or grounded surfaces, such as pipes, radiators, rangers
and refrigerators.
If the body is earthed or grounded, the electric shock will increase
b) Do not expose the power tool to rainy or wet conditions.
A power tool with water will increase
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired or with the effect of drugs, alcohol or medication.
Any inattention during operating power tools may result in serious personal injury.
b) Use safety equipment. Always wear eye protection.
Using safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection in appropriate conditions will reduce personal
injuries.
c) Avoid accidental operation. Ensure the switch is in
“off “position before plugging in.
Carrying the power tool with your finger on the switch or plugging in the power tool with the switch on
will cause unexpected operation
.
d) Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Always keep proper footing and balance.
This enables better control of the
power tool in unexpected situations.
