Valeport MIDAS Surveyor страница 11 Скачать руководство пользователя

Страница: 11 / 47

MIDAS Surveyor Operating Manual

Page 11

0420805d.doc

OPERATION

The MIDAS Surveyor is operated by means of a 16 button membrane keypad, illustrated below:

The basic function of each key is as follows. More detailed descriptions are covered in subsequent sections of this

manual:

Turns instrument on. Has no effect when instrument is already On.

Off

Press for 5 seconds to turn instrument off through a controlled shutdown. Press and hold for 10

seconds to force a hardware restart if instrument has locked up.

Backlight

Repeated pressing or pressing and holding darkens backlight. When minimum lighting is reached,

the next press will revert to full brightness.

Contrast

Repeated pressing or pressing and holding darkens contrast. When maximum contrast is reached,

the next press will revert to minimum contrast.

Help

Causes a text message to be displayed on screen, describing the function of the current menu

choice. Disappears after approximately 20 seconds of inactivity.

Menu

Activates the on-screen setup menu. Disappears after approximately 3 minutes of inactivity.

Left

Navigate through the Menu setup screens

Right

Down

Enter

Confirm choice

Escape

Go back one menu level (note that changes might still have been made)

Press to turn Logging On/Off. Enter key required for confirmation

Echosounder Reset. Press to cycle power to sounder, and return to minimum gain settings.

Fix Mark button (only active when logging is ON)

Log Pause/Continue (only active when logging is ON)

Off

Help

Contrast

Light

Surveyor

IDAS

GPS Echosounder

Enter

Esc

Содержание MIDAS Surveyor
















































Результаты поиска

Содержание MIDAS Surveyor

Отзывы:

Похожие инструкции для MIDAS Surveyor

Бренды по названию

Популярные бренды

Valeport MIDAS Surveyor, Руководство по эксплуатации

Результаты поиска

Содержание MIDAS Surveyor

Отзывы:

Похожие инструкции для MIDAS Surveyor

Бренды по названию

Популярные бренды