________________________________________________________________________________________________________________________________
Page 10
VALEO
– Product Line Valeo peiker Telematics - www.valeo.de
2.6
TECHNICAL SETUP
Pre-Caution:
Before testing the unit make sure that the power supply system
doesn´t exceed a voltage over 12V to avoid short-circuit.
Connect the wireless charger with the power supply system
by using the red and black cables (the yellow cable is
irrelevant).
Connect the wireless charger with the USB Can
adapter via the green/yellow cable.
Connect the USB Can adapter with a computer.
Turn on the power supply system.
Note: The LEDs of the CAN-Adapter are going
on and off several times. This process is uncritical
