BUS BODY ELECTRONICS
6
2 Operation
2.1 Switching on/off
2.1.1 Switching on
Press button
➔
The temperature that was last set is now set; auto
mode on (Fig. 4)
2.1.2 Switching off
Press button
➔
System is switched off
2.2 Auto mode
2.2.1 Activation
Press button in deactivated mode
➔
Mode is activated - corresponding status light and
function symbol in display light up (Fig. 5)
2.2.2 Deactivation
Press button in activated auto mode
➔
Mode is deactivated - corresponding status light and
function symbol are off (Fig. 8)
Note
Switching on system takes place only when the ignition is
switched on.
is activated
Note
If the auto mode is activated, the system automatically
switches on cooling mode
and heating mode
as re-
quired (Fig. 6 and 7).
Fig. 4 - SC600 Start display
Fig. 5 - SC600 auto mode is activated
Fig. 6 - SC600 auto mode is activated,
cooling mode
Fig. 7 - SC600 auto mode activated,
heating mode
