CAPTESTER
OPERATION MANUAL
AUS
1300 734 253 NZ 0800 734 253
8
STARTING THE TEST
During the Test
During the test, you can see the following screen:
–
Elapsed time:
this is the time since the beginning of the actual process (charging or discharging)
–
Voltage:
the voltage of the battery (during discharging), or the actual charging voltage (during charging)
Percentage capacity of the battery you will see the calculated C20 capacity.
When the battery test is completed, the tester will show the result as a test result the indication ‘Pass’ or ‘Fail’. Battery <60%
will be indicated as a ‘Fail’.
You can stop the discharge or charge any time if you press the START/STOP button.
Pendrive Suspend
Before removing the USB stick from the tester, make sure the actual test is finished. Then enter the Pendrive Suspend menu
and press the START button. Remove the pendrive and plug it into the PB USB and open the files with Akku.exe.
The test file on the pendrive is finished when the test is finished or stopped by pressing the START/STOP button. Removing
the pendrive or disconnecting the battery from the tester during the test will cause the loss of test data of the entire test.
