BT IBT612
OPERATION MANUAL
AUS
1300 734 253 NZ 0800 734 253
6
5.
When ready, press and hold the test button (approx. 1 sec.) to test the Ah capacity available in the battery.
PRESS TO TEST
6.
Record the Ah reading obtained onto a label for future reference.
TESTING Ah...
7.2Ah
7.
If required, press the test button again to verify the Ah reading obtained.
Capacities below 8Ah will be displayed with a decimal point up to 7.9Ah. Capacities above will
be rounded up from 8Ah to 99Ah. Capacities over 99Ah will be displayed as ‘OVER 100Ah’.
IMPORTANT!
8.
Recharge or replace when the Ah capacity available in the battery falls below 65% of the stated battery Ah capacity.
NOTE! Ah capacity can be affected by the batteries temperature and state of charge (SOC).
FLAT BATTERY
9.
This message indicates low battery voltage or Ah capacity. Recharge or replace the battery and re-test.
HIGH VOLTAGE
10.
This message indicates that the input voltage exceeds 15V.
REMOVE IMMEDIATELY!
