3
947628
Interconnections
The only method of powering the VIP-130L IP Paging
Horn is via a Power over Ethernet (PoE) switch or
power injector meeting the 802.3af specification.
Make all required signal connections before
connecting to Ethernet switch or power injector
meeting the 802.3af specification. Power is supplied
to the horn assembly via the VIP-LLE Network
Extender.
Network Connection
As shown in Figure 3, the VIP-LLE Network Extender
has one RJ-45 network connector on the front panel.
Use a standard Ethernet patch cable to connect the
NETWORK connector of the VIP-LLE Network
Extender to a 802.3af compliant PoE port (300 feet
maximum distance).
Signal Connections
As shown in Figure 3 and 4, audio output
connections are made on the rear panel of the VIP-
LLE Network Extender. Versions of the VIP-LLE
Network Extender with the color-coded, 8-pin screw
connector will connect standard CAT-5 twisted-pair
cable from the rear panel color coded connector of
the VIP-LLE Network Extender to the supplied VM-
186 RJ-45 connector (900 feet maximum distance).
Connect RJ-45 connector of horn to VM-186 RJ-45
socket. For versions of the VIP-LLE Network
Extender with the RJ-45 Audio Output connector, the
horn may be connected directly to the RJ-45 port. If
additional length is required, any standard T568A or
T568B extension may be used (900 feet maximum).
Status Indicator Lights
The VIP-LLE Network Extender has 3 status
indication lights:
STATUS:
Flashes during normal operation, and solid
when unit in reset.
LINK:
Indicates 100 Mbit Ethernet connection when
illuminated. No activity indicates 10 Mbit connection.
Act:
Indicator flashes to indicate network activity
Operation
Provide paging from SIP connection or via a variety
of Valcom managed VoIP products. Integration to
customer telephone system can be via SIP
registration, FXO port (with VIP-811), or FXS port
(with VIP-821).
Setup
Information specific to your application will need to be
programmed into the VIP-130L using a computer.
The PC used for programming would be connected to
the same subnet as the VIP-130L. Setup will be
done using the IP Solutions Setup Tool. The IP
Solutions Setup Tool may be downloaded from the
Valcom website at www.valcom.com.
TECHNICAL ASSISTANCE
Assistance is available from the factory when
problems are encountered. Call (540) 563-2000 and
press 1 for Technical Support or visit our website at
http://www.valcom.com.
Valcom equipment is not field repairable. Valcom,
Inc. maintains service facilities in Roanoke, VA.
Should repairs be necessary, attach a tag to the unit
clearly stating your company name, address, phone
number, contact person and the nature of the
problem. Send the unit to:
Valcom, Inc.
Repair & Return Dept.
5614 Hollins Road
Roanoke VA. 24019
VALCOM LIMITED WARRANTY
Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under
conditions of normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the
replacement, repair or refund of any such defective device within the warranty period, provided that:
1. inspection by Valcom, Inc. indicates the validity of the claim;
2. the defect is not the result of damage, misuse or negligence after the original shipment;
3. the product has not been altered in any way or repaired by others and that factory sealed units are unopened (a service charge plus parts
and labor will be applied to units defaced or physically damaged);
4. freight charges for the return of products to Valcom are prepaid;
5. all units 'out of warranty' are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to
additional charges for parts and labor).
This Limited Warranty is in lieu of and excludes all other warranties, expressed or implied and in no event shall Valcom, Inc. be liable
for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase,
operation, maintenance, installation, removal or use of the product. The maximum liability of Valcom under this warranty is limited to
the purchase price of the specific Product covered by the warranty.
Disclaimer.
Except for the Limited Warranty provided herein, the product is provided “as-is” without any warranty of any kind whatsoever
including, without limitation, any
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.
This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier should be
notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.
Headquarters:
Valcom, Inc.
5614 Hollins Road Roanoke, VA 24019-5056
Phone: (540) 563-2000 FAX: (540) 362-9800
