1
947628
ISSUE 6
VIP-130L IP Paging Horn
INTRODUCTION
The VIP-130L IP Paging Horn is a self contained
paging system which enables voice paging up to
1200 feet from an Ethernet connection. The
VIP-130L consists of a high efficiency 5 Watt Class-D
Horn and a VIP-LLE Network Extender allowing
stand alone capability when used with a SIP enabled
telephone system or can be accessed from a variety
of Valcom managed VoIP products.
SPECIFICATIONS
Access Methods
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
SIP telephone system
Features
RJ-45 network connection
LED Status Indicator
Network activity LEDs
Power over Ethernet (PoE) 802.3af compatible
High Efficiency Class-D 5 Watt Amplifier
Dimensions/Weight
(Horn)
7.00” H x 10.00" W x 10.00" D
(18.75 cm H x 25.4 cm W x 26.4 cm D)
Weight: 5.8 lbs. (2.63 kg)
Network Extender
(VIP-LLE)
1.30” H x 6.10" W x 6.00" D
(3.51 cm H x 15.72 cm W x 13.51 cm D)
Weight: 0.85 lbs. (0.39 kg)
Environment
Temperature: 0 to +40° C
Humidity:
0 to 85% non-precipitating
Nominal Specifications – HORN
Input Impedance:
600 Ohms
Input Level:
-10dBm
Output Impedance:
600 Ohms
Output Level:
-10dBm nominal
Nominal Specifications – VIP-LLE
Via 802.3af PoE Ethernet Switch:
Class 3
Packing List
Qty
Item
1
VIP-LLE Network Extender
1
5 Watt High Efficiency Horn
1 VSP
Document
2 Mounting
Brackets
4 Rubber
Pads
4 Wood
Screws
1 “C”
Clamp
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses
and can radiate radio frequency energy and if not
installed and used in accordance with the