Valcom VIP-102B IP Solutions Setup Tool Reference Manual Ver 6.3.0.0 Page 10
Main Application Window
Legend Description
The color of the endpoint icons indicates their current status. In many cases, the VIP-102B will prompt users as
to the proper steps to achieve normal status.
·
Status Unknown
–indicates that an endpoint that was previously detected in a scan can no longer
communicate with the VIP-102B. This could indicate that the endpoint was in a reset state when the scan
occurred. Rescanning too quickly following a reset can cause endpoints to appear in the status unknown
state.
·
Status Normal
–indicates that an endpoint has been detected and scanned normally.
·
Verification Required
–is the status for all endpoints for which the VIP-102B tool does not have complete
information on IP address, firmware version and last configuration date and time. All devices loaded from a
Snapshot file will initially require verification.
·
Error Status
–indicates a communications error between the VIP-102B and an endpoint. Common causes of
error status include having an incorrect or missing gateway address on the device or routing problems
between subnets.
·
Update Required
–indicates that the endpoint requires an update. Updating a device involves sending the
programming information from the VIP-102B IP Solutions tool to the Valcom IP device.
·
Reset Required
–indicates that the endpoint requires a reset. Endpoints that have experienced programming
changes require an update followed by a reset. Endpoints may also be reset by removing power for 60
seconds and then reapplying power.
·
Rescan Required
–indicates that the VIP-102B tool does not have all of the required information from an
endpoint.
·
Invalid Password
–indicates that the endpoint’s password does match any of the passwords currently known
by the VIP-102B program.
·
Firmware Suggested –
for server based devices only
