Valco Cincinnati LLD Скачать руководство пользователя страница 10

2-2

ValcoMelton

Section 2 - Safety Information

MC036 - Low Level Detection Alarm/AutoRefill Systems

Symbols - Continued

This symbol indicates a Note

Note

Note

Note

Note. Notes point out something of

special interest or importance to the reader. They give tips,
hints, and information in addition to what is necessary for the
step preceding it.

This symbol indicates the need to Unplug/Disconnect All Power

Unplug/Disconnect All Power

Unplug/Disconnect All Power

Unplug/Disconnect All Power

Unplug/Disconnect All Power

Sources

Sources

Sources

Sources

Sources and to let them de-energize before attempting any type
of work or maintenance. Remember that there can still be energy
in equipment, cords, and wires even when unplugged/
disconnected.

This symbol indicates the need to Lock Out All Power Sources

Lock Out All Power Sources

Lock Out All Power Sources

Lock Out All Power Sources

Lock Out All Power Sources

and to let them de-energize before attempting any type of work
or maintenance. If power is not locked out, the person working
on the equipment may be injured or killed if someone
unknowingly switches on the power to the equipment.

Содержание LLD


























































Отзывы: