PAGE 6
position, lift the seat back upward with one
hand while pulling the straps outward with
the other. The straps should lock in place
automatically.
IMPORTANT WARNING: THE FULLY
UPRIGHT POSITIONS SHOULD ONLY
BE USED FOR A CHILD THAT IS AT LEAST
SIX MONTHS OF AGE.
I>TO OPEN YOUR STROLLER:
22. Release the folding latch.
23. Standing behind the stroller, lift up the
stroller handle with both hands until the
frame is fully errect and locked into the
open position.
IMPORTANT WARNING: ALWAYS
TEST THAT THE FRAME IS FULLY
LOCKED PRIOR TO PLACING YOUR
CHILD(REN) IN THE STROLLER.
J>USING YOUR BRAKES:
23. To lock, simply press down on the the
brake lever until each individual brake’s
pins engage into the corresponding wheel
cog. The stroller may require a slight
forward or rearward movement in order to
line up the brake pins in the cogs.
24. To unlock, release the brake pin from
the wheel cogs by lifting the brake lever.
IMPORTANT WARNING: ALWAYS
CHECK THAT THE BRAKES HAVE
ENGAGED IN THE WHEEL COGS BY
TESTING THAT THE WHEELS CANNOT
ROTATE. ALWAYS SET THE BRAKES
WHEN THE STROLLER IS NOT IN MOTION
SO THAT IT WILL NOT ROLL AWAY. EXTRA
CAUTION IS REQUIRED WHEN ON AN
INCLINE OR HILL.
K>TETHER STRAP
WARNING: USE THIS STRAP TO STOP
THE PRAM/STROLLER ROLLING
AWAY.
L>HARNESS
Your stroller harness is specifically
designed with many built in safety features.
This includes the requirement that, when
opened, all straps are released so that no
dangerous loops can be formed causing a
strangulation hazard.
WARNING: YOUR CHILD MUST
ALWAYS BE HARNESSED WHEN IN
THE STROLLER
Closing your harness: Slide each of the
shoulder strap bottom guides (a) into the
corresponding channel on the top of each
side strap prong. Insert each completed
prong into the central buckle housing (b).
Carefully adjust the harness straps to snugly
fit your child by adjusting the sliders (c)
located on each strap. The harness should
be fitted to your child’s body, tight enough
so that they cannot wriggle free of the straps
but, loose enough, so as not to cause any
discomfort.
For even more flexibility, the height at
which your shoulder straps are fitted to the
stroller can be adjusted at 3 points(d).
To change the shoulder strap position:
Open the harness. Rethread the shoulder
strap strap back through the desired loop
on the front of the seat
Opening your harness: Press the central
housing button (e). This will release both
side prongs from the central housing.
The shoulder and waist straps will release
automatically from each other.
If the shoulder and waist straps do not
automatically disengage from each other,
manually slide the guides of the waist
channels. Your harness will separate into
5 sections.
IMPORTANT WARNING: WHEN NOT
IN USE, BE SURE THE SHOULDER
AND WAIST STRAPS ARE ALWAYS
DISCONNECTED FROM THE CENTRAL
HOUSING AND EACH OTHER
INSTRUCTIONS
VEEBEE DoubleTakeIM_020818.indd 6
2/8/18 3:27 pm
