Installing/Removing and using the front wheel forks
Your Runabout stroller utilizes our unique
and revolutionary new
TRI-MODE
™ front
swivel system:
1. To install the front fork, rotate the TRI-
MODE selection dial to the centre
(45
0
) position.
2. Tilt
the
stroller
frame upward on the
rear wheels.
3. Insert the fork shaft into the TRI-
MODE housing till it “clicks” into place.
IMPORTANT
: Always test that the fork is
securely engaged in the housing.
Folding/Opening your stroller
1.
To open
, unhook the frame
locking strap reversing the
previous step.
To remove the front fork:
1. Rotate the TRI-MODE selection
dial to the centre (45
0
) position.
2. Tilt the stroller frame upward on
the rear wheels.
3. Press the centre release button.
The fork will then be released.
The unique
TRI-MODE
™ swivel system is as
flexible as it is functional over a variety of
terrains and uses.
1.
LOCK
: This position is best for use on
extremely rough or soft terrain such as
sand etc which inhibit wheel swivel. To lock
your wheel, rotate the dial to the “LOCK”
position. Swivel the wheel around till it
locks into position.
2.
O
:
The central position locks the wheel into
a tight 45
0
swivel arc. This provides more
stability for use with a toddlerseat or when
going down inclines.
3.
SWIVEL:
This position allows full,
unfettered swivel action.
3. Simultaneously lift the secondary
safety catch and swing the handle
forward.
4. Holding the frame at the rear,
press down with your foot on the
rear basket tube. This will
disengage the side hinge locks.
5. Continue
pushing
the rear of the
basket, moving the rear wheels
forward beneath the frame.
1. Fold the hood back up against the
handle.
2. Release the locking clamps at either
side of the stroller.
2. Holding on to the side of the
footrest, with your foot stopping
the rear wheels, lift the handle so
that the frame begins to unfold.
6. You can lock the frame closed by
stretching the locking strap over the
frame, placing the metal catch over
the rivet on the chassis
