FOLDING YOUR STROLLER
FIGURE M and N - FOLDING
36. Note, step b is not required for folding, but will create the most
compact folded unit.
a. Remove bumper bar from housing (store for future use)
b. Remove hood for the most compact fold
c. Press seat recline release button located at rear of seat and
simultaneously
d. Lift the recline handle while
e. gently pushing seat forward as far as possible
37. Fold hood either back against the frame or all the way forward
after folding.
38. Squeeze the centre locking button on the handle.
39. While keeping the centre locking button depressed, press the
frame lock button firmly and push the handle inward, with a firm
downward action, past the frame lock until it engages the lock
spring. This will unlock the frame.
40. Continue to ease the chassis downward until it is fully
collapsed.
FIGURE O- FRAME LOCK
41. Locate the locking clasp on the side of the stroller frame.
42. With your stroller in the closed position, swivel the clasp into
position and secure the catch over the frame rivet.
43. Your stroller is now ready for storage or transport.
HARNESS
FIGURE P - USING YOUR HARNESS
YOUR STROLLER IS FITTED WITH OUR UNIqUE MULTI POINT SAFETY
HARNESS SYSTEM.
ALWAYS USE THE HARNESS, cORREcTLY FITTED AND
ADJUSTED, WITH YOUR cHILD IN THIS SEAT
TO SECURE YOUR CHILD IN THE HARNESS:
44. Slide the shoulder strap buckle (1) into the housing of the
waist strap buckle (2), forming a complete buckle
45. Repeat for the opposite side.
46. Insert the completed buckle (3) in the buckle housing (4) until
it engages securely in place.
47. Repeat for the opposite side.
48. Carefully adjust the harness straps to snugly fit your child
by adjusting the Sliders located on all Shoulder Straps, Waist
Straps and the Crotch Strap (5).
Your harness can be adjusted for even more comfort for smaller or
larger children by threading the harness webbing through the
adjusting ‘sliders’ in either direction, you can change the length
of the webbing thus making them tighter or looser over your
child’s torso.
The harness should be snugly fitted to the baby’s body, tight
enough so that the baby cannot wriggle itself free of the straps
but loose enough so as not to cause the baby any discomfort.
TO OPEN YOUR HARNESS
49. Press down firmly on the button in the center of the buckle
housing (4). The waist and shoulder strap sections will spring
free of the buckle housing.
50. If they do not automatically release, slide the shoulder strap
buckles (1) free from the waist strap sections. This is to ensure
that they do not form a potential entrapment area.
51. Your harness will separate into 5 sections
IMPORTANT
WARNING: WHEN NOT IN USE DISCONNECT SHOULDER
STRAPS FROM THE WAIST STRAP AND/OR BUCKLE.
M
N
O
1
1
2
3
4
P
a. Remove
bumper
bar
c. Forward
seat release
b. Remove
hood
d. lift recline
handle
e. Push
seat
forward
