FIGURE F
12. Secure the front legs to the stroller frame by wrapping
the 2 side straps under the footrest, behind the basket
connector and fastening below by inserting the buckle
into the housing. Tighten the strap as far as possible.
TO REMOVE THE SEAT
FIGURE G
13. To remove the seat: release the under frame security
strap by reversing the procedure outlined in point 5
14. Feeling the side of the nylon housing that sits below
the frame at each side (facing inward), locate the
release button in the side housing
15. Press the release button inward while simultaneously
lifting upward on the housing. Repeat for the other side
and lift the seat free from the stroller.
IMPORTANT WARNING: ALWAYS TEST THAT ALL BUCKLES AND
CLAMPS ARE SECURELY ENGAGED BEFORE USE.
FOLDING YOUR STROLLER WITH
THE SEAT ENGAGED
FIGURE H
16. Placing your foot on the footrest, press in turn each of
the two frame release buttons in the plastic housings on
either side of the toddlerseat frame.
17 .Lift the top half of the seat frame out of the plastic
housings and move away.
FIGURE I
18. Swing the upper frame legs upward flat against the
bottom of the seat (the lower frame will automatically
fold down.)
19 .Fold the top section forward onto the footrest. Your
stroller can now be folded as usual. Note: when folded
with the seat, your stroller may be less compact and not
fold all the way as it would without the seat.
F
G
H
FRAME
RELEASE
BUTTONS
I
UPPER
FRAME LEGS
LOWER FRAME
11
12
