USING YOUR haRNESS
FIGURE R
your stroller harness is specifically designed
with many built in safety features.
This includes the requirement that, when
opened, all straps are released so that no
dangerous loops can be formed causing a
strangulation hazard.
wARNINg: yOUR chIld MUsT AlwAys be
hARNessed wheN IN The sTROlleR
closing your harness: slide each of the
shoulder strap bottom guides (1) into the
corresponding channel on the top of each
side strap prong.
Insert each completed prong into the central
buckle housing (2).
carefully adjust the harness straps to snugly
fit your child by adjusting the sliders (3)
located on each strap. The harness should
be fitted to your child’s body, tight enough
so that they cannot wriggle free of the straps
but, loose enough, so as not to cause any
discomfort.
for even more flexibility, the height at which
your shoulder straps are fitted to the stroller
can be adjusted at 3 points.
To change the shoulder strap position:
from the rear of the seat, thread the top of
the strap back through the harness slot (26)
by manoeuvring the locking ring so that it
fits through the slot.
Rethread the strap back through the desired
slot from the front of the seat
Opening your harness:
Press the central housing button (4).
This will release both side prongs from the
central housing. The shoulder and waist
straps will release automatically from each
other.
If the shoulder and waist straps do not
automatically disengage from each other,
manually slide the guides of the waist
channels. your harness will separate into 5
sections.
IMPORTANT wARNINg: wheN NOT IN
Use, be sURe The shOUldeR ANd wAIsT
sTRAPs ARe AlwAys dIscONNecTed
fROM The ceNTRAl hOUsINg ANd
eAch OTheR.
R
1
2
4
3
3
