VALBERG WF 612 D DS701T, Инструкция по эксплуатации

Страница: 32 / 150

29 EN
Useful information
C
• Unscrew the water inlet hose(s) at the washing machine.
• To remove the filter mounted on the water inlet valve, use needle nose pliers to gently pull on
the plastic bar inside the filter.
• A second filter is mounted on the end of the water inlet hose to be connected to the tap. To
remove the second filter, use needle nose pliers to gently pull on the plastic bar inside the filter.
• Thoroughly clean the filter using a soft brush and wash with soapy water. Then rinse thoroughly.
Reinsert the filter, by pressing on it lightly.
CAUTION
Filters fitted to the water inlet valve can get
clogged as a result of poor water quality or lack
of maintenance. It may cause water leaks. Such
incidents are not covered by the warranty.
Drain pump filter
1
2
3 4
5 6
The washing machine's drain pump filter system prolongs the lifetime of the pump by preventing
lint from getting inside. We recommend cleaning the drain pump filter every 2 months. The drain
pump filter is located behind the access hatch in the lower right corner of the front of the machine.
To clean the drain pump filter: