6
7
EN
EN
Regulatory guidelines
Regulatory guidelines
DANGER: Do not connect the appliance to the mains
with wet hands, as this could cause an electric shock.
DANGER: If the laundry has been pre-treated with
cleaning products containing solvents, this may cause
an explosion in the appliance. Rinse the pre-treated
laundry thoroughly with water before drying.
• Always check the labels on the clothing before adding them
in the appliance; otherwise, they may get damaged.
• Always check and remove any objects from the pockets of
clothing before adding the item to the appliance.
• The appliance should be used with damp textiles which have
been previously washed and spun before loading into the
appliance.
• Depending on the appliance, the final phase of the appliance’s
drying cycle is done without heat (cooling cycle) so that the
items are kept at a temperature that won’t damage them.
• Any cleaning and/or in-depth maintenance work done on
the appliance must be conducted with the electrical outlet
disconnected.
• Do not use a steam cleaner when cleaning the appliance.
• In the event of a malfunction which cannot be resolved with
the information provided in this manual, please contact the
after-sales service
WARNING: Keep the packing materials and accessories
out of the reach of children. Never let children play with
the packaging or accessories.
DANGER: Never use the appliance outdoors.
• Do not install the appliance on a carpet or similar floor covering.
WARNING: Remove the drum immobilisation clamps
at the rear of the appliance, if present. These safety
screws are only needed when transporting the appliance
and must be removed before the appliance is used for
the first time, at the risk of causing damage that is not
covered by the warranty.
WARNING: The appliance must be connected to a mains
socket with a protective earth connection.
The appliance must not be connected via an extension
cable or power strip.
ATTENTION: Do not bend, crush or pinch the power
supply cable.
Leave enough space behind the appliance so that it is
not in direct contact with the mains socket.
