VALBERG DHP 8 A++ W205T, Инструкция по эксплуатации

Страница: 36 / 136

29 EN
Useful information
C
Problem Cause Solution
Drying machine does not
turn on or program cannot
be started. Drying machine
does not run after it is
configured.
Power plug might be
unplugged.
Make sure the power cord is
plugged in.
Loading door might be
open.
Ensure that the loading door
is properly closed.
A program might not be
set or Start / Pause /
Cancel button might not be
pressed.
Check that the program is
set and it is not in Pause
position.
Child lock may be activated. Turn off the child lock.
Program terminated
prematurely for no reason.
Loading door might be
closed completely.
Ensure that the loading door
is properly closed.
There might be a power
outage.
Press the Start / Pause /
Cancel button to start the
program.
Water tank may be full. Empty the water tank.
Clothes have shrunk,
hardened or spoiled.
A program not suitable with
the laundry type might have
been used.
Check the maintenance
labels on the clothes and
select a program suitable
for the clothes.
Water drips from the
loading door.
Fibres might have gathered
on the inner sides of the
loading door and the
loading door gasket.
Clean the inner surfaces
of the loading door and
the loading door gasket
surfaces.
Loading door opens by
itself.
Loading door might be
closed completely.
Push the loading door until
the closing sound is heard.
Water tank warning symbol
is on/flashing.
Water tank may be full. Empty the water tank.
Water discharge hose might
have collapsed.
If the product is connected
directly to the water drain
check the water discharge
hose.
The lighting inside the
drying machine does not
turn on. (In models with
lamp)
The drying machine might
not have been turned on
using On/Off button.
Check that the drying
machine is turned on.
Lamp might be
malfunctioning.
Contact Authorized Service
to replace the lamp.