VALBERG CYCLONIC-S10, Инструкция по эксплуатации

Страница: 20 / 64

16 EN
Product usage
B
Charging the battery
The battery must be charged before first use and whenever the vacuum will not turn on
because the battery is too low.
NOTE: When the power is too low and the battery needs to be charged, the vacuum
will automatically turn off.
Insert the charger into the battery charging port.
Insert the plug into the mains socket.
• It takes approximately 6 hours to fully charge the battery for the first time. Any subsequent
charges will then take up to 3 hours.
• The different battery LED indicator statuses are indicated below:
LED indicators Battery level
1 LED indicator flashing
Battery low - Charge the vacuum
1 LED indicator lit 50%
1 LED indicator lit
1 LED indicator flashing
50% and charging
2 LED indicators lit 100% (once fully charged for 10 minutes, the LEDs
will turn off.)
• When the battery is charged, the usage times are as follows:
Vacuum type Level 1 (low) Level 2 (medium) Level 3 (high)
Handheld vacuum 55 minutes
25 minutes 10 minutes
Stick vacuum 48 minutes
WARNING!
• After charging, always unplug the charger from the battery charging port
and mains socket.
• Do not charge the battery at temperatures below 5°C or above 40°C.
CAUTION:
To recharge the battery, only use the removable power supply unit
supplied with the device. MC2805B-V