VALBERG CNF 326 D X742C, Инструкция по эксплуатации

Страница: 29 / 102

22 EN
Useful information
C
CAUTION
Before troubleshooting, disconnect the power supply. Only
a qualified electrician of competent person must do the
troubleshooting that is not in this manual.
IMPORTANT
There are some sounds during normal use (compressor,
refrigerant circulation).
Problem Possible cause Solution
Appliance does not
work
Temperature regulation knob is
set at number "0".
Set the knob at other number to
switch on the appliance.
Mains plug is not plugged in or
is loose
Insert mains plug.
Fuse has blown or is defective
Check fuse, replace if
necessary.
Socket is defective
Mains malfunctions are to be
corrected by an electrician.
The food is too
warm.
Temperature is not properly
adjusted.
Please look in the initial
Temperature Setting section.
Door was open for an extended
period.
Open the door only as long as
necessary.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
Turn the temperature regulation
to a colder setting temporarily.
The appliance is near a heat
source.
Please look in the installation
location section.
Appliance cools too
much
Temperature is set too cold.
Turn the temperature regulation
knob to a warmer setting
temporarily.
Troubleshooting