VALBERG CH 60 2M W 302C, Инструкция по эксплуатации

Страница: 11 / 71

4 EN
Using the appliance
A
Installation
If you have an outlet to the outside, your cooker hood can be connected as below picture by
means of an extraction duct (enamel, aluminum, flexible pipe or nonflammable material with
an interior diameter of 120mm).
1. Before installation, turn the unit off and unplug it from the outlet.
2. The cooker hoods should be placed at a distance of 65-75cm from the cooking surface for
best effect. See Pic 1.
3. To install onto the wall, drill 4 holes of Ø 8mm on a suitable place according with the centre
distance of hole in the back of the cooker hood. See Pic 2
4. Insert the nut into the holes.
5. Insert the screws into the nuts and tight.
6. Put up the cooker hood onto the fixed screws.
7. Then use the attached accessories enclosed to turn the screws into the two holes of inside