VALBERG 973315, Инструкция по эксплуатации, Страница: 13 / 47

23 EN 22 EN
Useful information
C C
Useful information
Door seal fails to be tight
• Remove foreign matters on the door seal
• Heat the door seal and then cool it for restoration (or
blow it with an electrical drier or use a hot towel for
heating)
Water pan overflows
• There is too much food in the chamber or food stored
contains too much water, resulting in heavy defrosting.
• The doors are not closed properly, resulting in frosting
due to entry of air and increased water due to defrosting.
Hot housing
• Heat dissipation of the built-in condenser via the
housing, which is normal
• When housing becomes hot due to high ambient
temperature, storage of too much food, provide sound
ventilation to facilitate heat dissipation.
Surface condensation
• Condensation on the exterior surface and door seals of
the refrigerator is normal when the ambient humidity is
too high. Just wipe the condensate with a clean towel.
Abnormal noise
• Buzz: The compressor may produce buzzes during
operation, and the buzzes are loud particularly upon start
or stop. This is normal.
• Creak: Refrigerant flowing inside of the appliance may
produce creak, which is normal.
Changing the Light
This product contains a light source of energy efficiency class G.
Light source in this product can only be replaced by qualified professionals.
Please contact after-sales service if the light source fails.
The light source shall be removed at the end of the product’s useful life, with sorting and
recycling done separately.