19
EN
Cleaning and maintenance
C
Use water to clean the filters and dust cup, then leave to dry naturally and thoroughly
before using them again.
WARNING!
• To prevent damage to the unit, only use dry, intact filters!
• Reassemble all the parts in reverse order.
Cleaning the 2-in-1 nozzle
• Detach the 2-in-1 nozzle from the vacuum.
• Remove any hair or bits. Wash with water.
• Allow to dry thoroughly before reattaching to the vacuum.
Troubleshooting
Problem
Possible Cause
Solution
The unit does not
work.
• The unit is not
charged.
• The charging indicator
light does not light up
while charging.
• The dust cup is full.
• Fully charge the battery.
• Make sure the USB cable is securely
connected to the USB power supply.
Press the Power button. If the unit is
still not working, get it checked by a
qualified technician.
• Empty the dust cup.
The suction power
is weak, there is
no suction or the
motor vibrates.
• The nozzle is blocked.
• The filters are
blocked, dirty or
broken.
• Remove the blockage.
• Clean the filters.
• If necessary, replace the filter with a
new one.
The operating time
is too short after
charging.
• It has not been
charged for enough
time.
• The battery is old.
• Fully charge the battery, as indicated
in the
Charging the battery
section.
The battery
indicator light
keeps flashing
quickly.
• The filters or dust
cup are blocked,
thus increasing the
current.
• The battery is dead.
• Remove the blockage.
• Clean the filters.
• Fully charge the battery, as indicated
in the
Charging the battery
section.
Содержание 969871
