VALBERG 14S42 C XAD929C, Инструкция по эксплуатации, Страница: 26 / 175

19 EN
Using the appliance
B
Water softener
Select a programme and start. The water softener must be adjusted manually, using the
water hardness indicator.
• The water softener is designed to eliminate mineral salts contained in the water, which
may affect the correct operation of the appliance.
• The higher the mineral content of your water, the harder it is.
• The softener should be adjusted according to the water hardness in your area.
• Your local water authority can give you information on the hardness of the in your area.
Adjusting salt consumption
• This dishwasher can adjust the amount of salt used according to the hardness of the
water. This helps to optimise and adapt the level of salt consumption.
• Please follow the steps below to adjust the salt consumption:
1. Turn on the appliance.
2. Within 60 seconds of turning on the appliance, press the «Programmes» button for 5
seconds to enter the water softener setting mode.
3. P re ss t h e « P ro g ra m m e s » b u t to n to s e le c t t h e co r re c t s e t t i n g
for your local area. The settings adjustment order is as follows:
H1 -> H2 -> H3 -> H4 -> H5 -> H6.
4. Press the power button to exit the setting function.
Water hardness
Water softener
setting
Salt
consumption
(grams/cycle)
German
degrees
French
degrees fH
British
degrees Clark
Mmol/l
0 - 5 0 - 9 0 - 6 0 - 0.94 H1 0
6 - 11 10 - 20 7 - 14 1.0 - 2.0 H2 9
12 - 17 21 - 30 15 - 21 2.1 - 3.0 H3 12
18 - 22 31 - 40 22 - 28 3.1 - 4.0 H4 20
23 - 34 41 - 60 29 - 42 4.1 - 6.0 H5 30
35 - 55 61 - 98 43 - 69 6.1 - 9.8 H6 60
1 ° dH = 1.25 ° Clarke = 1.78 ° fH = 0.178 mmol/l
Factory setting: H3
Contact your local water company for information on the hardness of your water.