VALBERG 14S42 C XAD929C, Инструкция по эксплуатации, Страница: 19 / 175

12 EN
Using the appliance
B
pipe should not exceed 1000 mm. To avoid backflow, the free end of the hose should not
be submerged in water.
• Ensure that the drain hose is securely fastened either in position A or position B.
Back of the dishwasher
Drain hose
Worktop
Water inlet
Drain hose
Power cord
Draining excess water from hoses
• If the sink is more than 1000 mm above the floor, excess water from the hoses cannot be
drained directly into the sink. It will be necessary to drain it into a bowl or other suitable
container that is lower than the sink.
Water outlet
• Connect the drain hose. Ensure it is securely attached to prevent water leakage. Check
the drain hose is not twisted or crushed.
Hose extension
• If you need a drain hose extension, make sure you use the same type of hose. It should
not be longer than 4 metres, otherwise the cleaning performance of your dishwasher
may be reduced.
Connecting the siphon
• The waste water connection must be less than 100 cm (maximum) from the bottom of
the tub. The water drain hose must be attached.