WSP150 has a weather-proof IP66 plastic housing with metal reinforcement. You can mount it on
Ø 30 mm … 102 mm (1.18 … 4.02 in) pole masts with the provided adjustable mounting clamp. WSP150
has 4 cable glands. Two cable glands are for cable branching and chaining in tower installations when
common data and power lines are shared by several devices.
Figure 1 Operating Principle
Mounting WSP150
You can mount WSP150 on a wall or to a boom, with 2 screws inserted to the lowermost through-holes
behind the cover fixing screws. If you enter the screws from the rear, no nuts are needed. You can use
the M4 threads in the holes.
1.
Disconnect all live voltages.
2.
Attach the unit to the mast close to the protected device with the adjustable mounting clamp. Set
the steel strip beneath the latch at the back of the enclosure
3.
Fix the steel strip around the pole mast. You can shorten the strip to a suitable length.
4.
Attach the strip ends to the fastener and secure the unit to the mast by tightening the fastener
screw.
5.
Open the 4 plastic screws and remove the enclosure cover.
Quick Guide
M210809EN-D
2
