Vaisala Indigo500 Series, Руководство пользователя

Страница: 61 / 124

5.2 Starting up transmitter using web interface
The transmitter has a web interface for remote access. Take the following steps to start using
the transmitter through the web interface.
Start up the non-display transmitter model using instructions in Connecting to
web interface with a direct connection between transmitter and computer
(page 62)
.
Figure 26 Web interface, Measurements
view
5.2.1 Connecting to web interface
Computer with:
• RJ45 Ethernet connector
• Web browser, for example, Firefox, Chrome, or Safari. Using the most recent
version is recommended.
1. Connect your computer to the same network as the transmitter.
2. Power up the transmitter.
Powering up takes some minutes.
3. Select the configuration menu symbol at the upper right corner of the touchscreen.
4. In Transmitter > Network , configure the network connection.
For instructions on configuring the network connection, see Configuring network
connection on touchscreen (page 54) .
If you have already configured the network connection, you can move to step 5 .
Chapter 5 – Start-up
61