Chapter 4 ________________________________________________________________ Operation
VAISALA____________________________________________________________________ 41
TIME, DATE Setting Time and Date
Syntax: TIME<cr>
Syntax: DATE<cr>
Sets the time and date to the transmitter.
Example:
>time<cr>
Current time is 04:12:39
Enter new time (hh:mm:ss) ? 12:24:00<cr>
>date<cr>
Current date is 2000-01-01
Enter new date (yyyy-mm-dd) ? 2004-06-30<cr>
>
NOTE
Time and date are cleared to 2000-01-01 00:00:00 at reset.
NOTE
Only about 1 % accuracy is obtained with the software clock.
FTIME, FDATE Add Time and Date
to SEND and R Outputs
Syntax: FTIME x<cr>
Syntax: FDATE x<cr>
where
x =
ON/OFF
The command enables or disables output of time and date to the serial
line.
