Vaisala HUMICAP HMT140, Руководство пользователя

Страница: 14 / 70

Introduction to the HMT140
10 VAISALA
adjust the HMT140. You have the following options when
purchasing a new probe from Vaisala:
• Order a new probe and keep your current one.
• Order a new probe and return the old one to Vaisala
(replacement probe).
Note:
Only probes that have a compatible digital out-
put (VDIGI mode) can be used with the
HMT140. Compatible probes have the letter "V"
as the first letter in their order code. The order
code is written on the probe.
Optional Display
The HMT140 is also available with an optional graphical
128x64 pixel resolution LCD display. The display shows the
measurement results of selected parameters in selected units
(defined at the time of ordering). The parameters are
displayed simultaneously as two separate rows on the
display.
HMT140 Components
Figure 1 illustrates the main features of the HMT140. On the
left is a remote probe model without display, and on the right
is a fixed probe model with the optional display. The
numbers and arrows indicate the main components of the
HMT140 models.
Figure 1: HMT140 Features