manualshive.com logo in svg

Vaisala HMP7, Руководство пользователя, Страница: 31 / 96

Поделиться
Скачать
Vaisala HMP7 Скачать руководство пользователя страница 31

Figure 15 Connecting probe to Insight

1. Open Insight software.

2. Connect the USB cable to a free USB port on the PC or USB hub.
3. Connect the probe to the USB cable.

4. Wait for Insight software to detect the probe.

4.4 Configuration options

Select 

 > Configure Device

 to access configuration options in Insight software.

Available configuration options include all of the Modbus configuration registers (see

Configuration registers (page 82)

) and several additional options. Insight software is the

recommended way to change the probe configuration.

You can restore the probe back to its default settings using the 

Factory Default 

Settings > Restore Settings

 function. Doing this will also clear any user

adjustment and restore the latest factory calibration.

Chapter 4 – Configuration with Insight software

29

陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备

Tel:029-88186182 Web:www.xavery.cn Email:[email protected]

Содержание HMP7

































































































Отзывы:

Нет отзывов