2.1.1 Transmitter parts
9
11
8
1
2
3
4
5
6
7
10
Figure 1 GMW80 series transmitter parts
1
Opening tab
2
Screw terminals. The wiring information is marked on the mounting base next to the
terminals.
3
Barrier to prevent the cable from being routed below the GM10 measurement module.
The area to avoid is marked
NO CABLES
on the mounting base.
4
Orientation arrow. Should point up after mounting base has been installed.
5
Opening for cable when wiring from behind (recommended)
6
Place for cable tie (optional, for cable strain relief)
7
Breakaway tab for routing the cable from below
8
Locking screw. Supplied with the transmitter.
9
Breakaway tab for routing the cable from above
10
CO
2
level indicator LEDs (on models with the letter A) or relay indicator LED (on models
with the letter S)
11
Display (on models with the letter D)
Chapter 2 – Product overview
9