background image

Chapter 4 _______________________________________________________________ Installation 
 

VAISALA _______________________________________________________________________ 39 

Foundation 

Soil and Frost Conditions 

When designing the foundation, the local construction companies must 
be consulted to find out about the soil and frost conditions in your area. 
When the soil is frost-susceptible, make sure that you always use proper 
insulation. 

Orientation of the Mast 

Refer to Figure 5 on page 40 for the orientation of the mast. The concrete 
blocks for guy wires have to be placed so that the pole mast can be tilted 
west (east in the southern hemisphere) by releasing only the detachable 
guy wire 1; see Figure 5 on page 40. 

To ease the orientation of the mast, the two-headed arrow is cut on the 
orientation plate. "N" should face north and "S" should face south to 
ensure the aiming of the weather station devices to the correct position. 

Содержание AWS330











































































































































































































































































































Отзывы: