
Installation
7
Mounting unit using Velcro fasteners
!
Velcro Fasteners are not included
!
VAIS Technology strongly recomand to ground unit to the car chassis for best results
NOTE
“Hard” Velcro Fastener
Carpet or car chassis
SoundLinQ3
“Soft” Velcro Fastener
1 2
ON
1 2
ON
MD Changer Emulation Mode programming steps:
@
Properly install the unit.
@
Put both programming switches in the “DOWN” position.
@
Put ignition switch into the “ACC” position.
@
Wait for a long beep followed by a few short beeps. This may take up to one minute.
@
Return programming switches into their default position (both switches “UP”). Wait up to 30 seconds until
confirmation beep.
@
Put ignition switch into the “OFF” position. Wait at least 10 seconds.
@
Put ignition switch into the “ACC” or “ON” position.
@
Check SoundLinQ3 for functionality, especially TEXT capabilities.
CD Changer Emulation Mode programming steps:
@
Properly install the unit.
@
Put “Right” programming switch in the “DOWN” position.
@
Put ignition switch into the “ACC” position.
@
Wait for a long beep followed by a few short beeps. This may take up to one minute.
@
Return programming switches into their default position (both switches “UP”). Wait up to 30 seconds until
confirmation beep.
@
Put ignition switch into the “OFF” position. Wait at least 10 seconds.
@
Put ignition switch into the “ACC” or “ON” position.
@
Check SoundLinQ3 for functionality, especially TEXT capabilities.
!
Improper Emulation Mode setting may cause unit to be unrecognized by head unit.
!
By activating “CD or MD Changer Emulation Mode” you force the unit to find proper location in the vehicle
Audio/Video network.
Emulation Mode Selection (CD and MD changer emulation)
Both switches
“DOWN”
IMPORTANT
Right switch
“DOWN”
Ignition into
“ACC” or “ON”
position
Ignition into
“ACC” or “ON”
position
Confirmation beep
(Red LED blinks)
Confirmation beep
(Red LED blinks)
1 2
ON
1 2
ON
Both switches
“UP”
Both switches
“UP”
up to 30 sec
up to 30 sec
Confirmation beep
(Red LED blinks)
Confirmation beep
(Red LED blinks)
Ignition into
“OFF” position
Ignition into
“OFF” position
up to 10 sec
up to 10 sec