Connections
7
Head Unit (Radio Receiver)
Connection diagram used for most 2006-2009 Lexus/Toyota vehicles
Connecting iVIC to head unit
(for Lexus/Toyota vehicles)
A
A
Factory Audio
harness
(if present)
Plug into
Head Unit
(connector “B”)
12-pin connector
Lexus GX 470 Radio Receiver shown.
Locate connector “A” (12-pin connector) on your Radio.
Connector location on the Radio may be
different from shown above.
To iVIC
Audio Harness (36”)
12 Pin
Y-
harness
Connecting iVIC to Vehicle GVIF Display Port
To Un-plug any connector do NOT pull it by the wires.
WARNING
!
FACTORY MULTI-DISPLAY ECU
To iVIC GVIF
Display Port
Disconnect Factory Digital Video Cable
(if present) from “Display Port”
and reconnect to iVIC Digital
Video Y-harness.
If Navigation System
and Multi-Display ECU is one piece
then Factory Digital Video Cable
is not present.
iVIC
Digital Video Harness
Digital Video Harness MUST NOT be bended
with less than 1 inch radius.
!
ATTENTION
