Installation
Remove the factory original USB Female Cable from the fairing pocket and
replace with the USB Female Cable from the GSR-HM51.
Connect the factory original USB Female Cable (which was removed from
the fairing pocket) to the USB Male Cable from the GSR-HM51 which is
labeled “SAT Radio”.
Apply silicone or other waterproofing material to
the exterior of these USB connectors to make a watertight seal.
2
3
Factory Original
USB Female Cable
2
2
33
Factory Original
USB Female Cable
Connect and
waterproof
IMPORTANT
IMPORTANT
!
INSTALLER
:
This USB connection
must be made water-
proof.
Apply silicone or other
caulk to the exterior
of this USB connection
to ensure that there is a
watertight seal.
Failure to waterproof
this connection can
damage the GSR-HM51
and the factory radio
receiver through water
intrusion.
Connect the GSR-HM51 to 12V power. Note that all power wires must be
connected, and the Pink and 12V wires must be connected to
constant battery power.
4
Place the magnetic mount antenna where it has a clear unobstructed view
of the sky. The surface of the antenna which has the SiriusXM logo must be
facing the sky. There can be no metal objects above the antenna which will
interfere with receiving a satellite signal.
Mount the GSR-HM51 using the built-in bracket to a secure location where
it will not have direct contact with water.
6
5
Blue AND Green Wires
connect BOTH to car chassis ground
CONSTANT BATTERY POWER ONLY
!
ALL POWER WIRES
ALL POWER WIRES
MUST BE CONNECTED
MUST BE CONNECTED
!
Pink AND Yellow Wires
CONSTANT BATTERY POWER +12V
connect BOTH to constant battery power
DO NOT CONNECT TO
DO NOT CONNECT TO
ACCESSORY POWER
ACCESSORY POWER
!
Bl
AND G
Wi
Pi
CONS
connec
!
Installation
7
