Vaillant VRT 350f, Руководство по установке

Страница: 12 / 36

4 Installation
12
Installation instructions VRT 350f 0020131978_00
3
4
4
7
6
5
3
2
1
3
1 Radio receiver unit
2 Wall-mounting base
3 Mounting holes
4 Openings for cable duct-
ing
5 Pin header with terminals
for the eBUS line
6 Wall-mounting base cover
7 Slot for screwdriver
3. Insert a screwdriver into the slot (7) on the wall-mount-
ing base (2) .
4. Carefully lever the radio receiver unit (1) from the wall-
mounting base
(2)
.
5. Mark the position on the wall. Take the eBUS line cable
routing into account when doing so.
6. Drill two holes in line with the mounting holes (3) .
–
Diameter of mounting hole: 6 mm
7. Route the eBUS line through one of the cable ducts (4) .
8. Insert the wall plugs supplied.
9. Use the screws supplied to secure the wall-mounting
base.
10. Connect the eBUS line to the terminal block. (
→
Page 14)
11. Carefully insert the radio receiver unit in the wall-
mounting base. Ensure that the pin header (5) on the
wall-mounting base fits into the radio receiver unit
connector provided.
12. Carefully press the radio receiver unit into the wall-
mounting base until the locking tabs on the radio re-
ceiver unit are heard to click into place.
4.3 Fitting the radio controller
1. Fit the controller on an interior wall of the main living
room in such a way that ensures that there are no prob-
lems with the RF connection between the controller and
the radio receiver unit.