5
uniSTOR - Installation manual for additional Immersion Heater
• Fix the immersion heater with the fastening ring (7).
Tighten it with a wrench or a large screwdriver.
7
Fig. 3.4 Fixing the immersion heater
• First push the longer thermostat sensor (8) into the
sensor pipe (9).
• Then push the shorter sensor (10) for the thermal cut-
out into the sensor pipe.
8
9
10
Fig. 3.5 Mounting of the sensor
• Now connect the heater wiring (see figure 3.6).
N
L
Fig. 3.6 Electrical connections
Mounting of the accessory immersion heater 3
