Vaillant eloSTOR plus VEH 10/7 U, Инструкция по установке и обслуживанию

Страница: 11 / 12

Appendix
0020244342_01 eloSTOR plus Installation and maintenance instructions
11
Appendix
A
Technical data
Technical data
–
General
VEH 10/7 U
Product type Direct electric do-
mestic hot water cyl-
inder with system
for supplying one or
more draw-off points.
Type of installation
Setting up below the
work surface
Inside of the cylinder Enamelled steel
Operating mode
Single-circuit unit
Nominal capacity 10 l
Maximum temperature at the out-
let 80
℃
Energy-saving mode 60
℃
Temperature limit possible
–
40
℃
–
60
℃
Mixed water volume at 40 °C * 17 l
Maximum operating pressure 0.7 MPa
(7.0 bar)
Product dimensions, width 290 mm
Product dimensions, depth 284 mm
Product dimensions, height 482 mm
Net weight 8.05 kg
Weight when filled with water 18.05 kg
* The mixed water volume with an operating temperature of 40 °C results from adding cold water to the water in the cylinder,
which has a temperature of 65 °C, when the unit is ready to operate.
Technical data
–
Electrics
VEH 10/7 U
Electric connection
230 V / 50 Hz
Energy consumption in standby
mode/24 hours
0.333 kWh
Level of protection
IP 24 D
Safety Radio-shielded, does
not affect the mains
supply