Notes on the documentation 2
0020264435_00 electronicVED Installation instructions
5
2
Notes on the documentation
2.1
Observing other applicable documents
▶
You must observe all the operating and installation in-
structions included with the system components.
2.2
Storing documents
▶
Pass these instructions and all other applicable docu-
ments on to the system operator.
2.3
Validity of the instructions
These instructions apply only to:
Product article number
VED E 18/7 INT II
0010023714
VED E 21/7 INT II
0010023715
VED E 24/7 INT II
0010023716
VED E 27/7 INT II
0010023717
3
Product description
3.1
Overview
10
9
11
12
13
8
7
6
5
4
3
2
1
1
Mains connection ter-
minal
2
Top cable duct
3
Adjustment spindle
4
Safety switch
5
Electronics
6
Temperature selector
(infinitely variable)
7
Optional space under-
neath for the mains
connection terminal
8
Filter
9
Cold water connection
10
Bottom cable duct
11
Hot water connection
12
Safety overheat cut-off
device
13
Heating block
3.2
Function
The product heats up drinking water via a bare wire in the
heating block using the flow-through principle.
The drinking water can be drawn from several draw-off
points.
The electronics measure the temperature of the water in the
cold water supply and the water volume flow. The electrical
performance that is required to heat the water to the required
hot water temperature is calculated using these two values.
The temperature can be set to any value between 30 °C and
60 °C on the product's temperature selector.
The hot water temperature depends on:
–
Water inlet temperature
–
Water outlet volume
–
Performance category of the unit
If the set hot water temperature is not reached, reduce the
water volume.
3.3
Information on the data plate
Symbol
Meaning
The VDE GS mark confirms
that the unit complies with
standards and has been
tested for safety.
Symbol confirming conformity
with the electromagnetic com-
patibility standard
Read all of the instructions.
Barcode with serial number,
The 7th to 16th digits of the
serial number form the article
number
3.4
CE label
The CE label shows that the products comply with the basic
requirements of the applicable directives as stated on the
identification plate.
The declaration of conformity can be viewed at the manufac-
turer's site.
