Vaillant ecoVIT exclusiv, Инструкция по установке и обслуживанию

Страница: 27 / 44

Appendix
0020258610_00 ecoVIT exclusiv Installation and maintenance instructions
27
C Overview of diagnostics codes
Note
Since the code table is used for various products, some codes may not be visible for the product in question.
Code Parameter
Values
Unit Explanation, selection, increment
Default
setting
Own
setting
Min. Max.
D.000 Heating partial load Output-range-
specific
kW Adjustable partial heat load
Maximum value = automatic partial
heat load
Product automatically adjusts the
max. partial load to the current
system demand Maximum
value
D.001 Pump overrun: Heating 2 60 min Overrun time of internal heating
pump for heating mode
1 5
D.002 Max. anti-cycl. time: Heat-
ing 2 60 min Max. burner anti-cycling time heat-
ing at 20 °C flow temperature
1 20
D.004 Cylinder temperature ac-
tual value Current value
℃
Measured value for the domestic
hot water sensor if a domestic hot
water cylinder with sensor is con-
nected
–
Not ad-
justable
D.005 Heating target flow temper-
ature Current value
℃
Flow temperature target value (or
return target value)
Current target value, calculated
from the set value, control, control
type, etc.
–
Not ad-
justable
D.007 Cylinder temperature tar-
get value Current value
℃
Only products with no integrated
hot water generation and with a
connected cylinder
15 °C = frost protection, 40 °C up
to
D.020 (max. 70 °C)
–
Not ad-
justable
D.008 Controller 3-4 Current value
–
Room thermostat at terminal 3-4
0: RT input terminals 3-4 interrup-
ted, no heating mode
1: RT input terminals 3-4 closed,
no heating mode
–
Not ad-
justable
D.009 eBUS controller target
value Current value
℃
Target flow temperature from the
external eBus control
Minimum from the external eBUS
target value and the target value
for terminal 7
–
Not ad-
justable
D.010 Internal pump Current value
–
Heating pump status
0: Off
1: On
–
Not ad-
justable
D.011 External pump Current value
–
Status of additional external heat-
ing pump
0: Off
1-100: On
Connection via 2 in 7 multi-func-
tional module or X6
–
Not ad-
justable
D.012 Cyl. charging pump Current value
–
Status of cylinder charging pump
0: Off
1-100: On
–
Not ad-
justable
D.013 Circulation pump Current value
–
Status of circulation pump
0: Off
1-100: On
Connection via 2 in 7 multi-func-
tional module or X6
–
Not ad-
justable