Vaillant ecoTEC plus SERIES, Инструкция по эксплуатации

Страница: 4 / 12

Instructions for use ecoTEC plus / 0020020829_03 4
2 Safety
2.1 Setup and adjustments
Installation and adjustment of the boiler as well as service,
maintenance and repair of the boiler may only be carried out
by a competent person in accordance with the Gas Safety
(Installation and Use) Regulations 1998. (In the U.K. “CORGI”
registered installers undertake the work to a safe and satis-
factory standard). If the boiler is installed in a compartment
do not obstruct any purpose provided ventilation openings,
and do not use the compartment for storage purposes.
2.2 What to do in an emergency
d Danger!
Smell of gas. Risk of poisoning and explosion
due to a malfunction
If you smell gas or suspect a gas leak:
• Do not switch lights on or off.
• Do not use any other electrical switches.
• Do not use a telephone in the hazardous area.
• Do not use naked flames, such as matches or cigarette lighters.
• Do not smoke.
• Turn off the gas supply at the gas meter.
• Open the windows and doors.
• Warn other residents.
• Get out of the house.
• Consult your gas supplier, service agent or other
competent person.
• Telephone the National emergency number 0800 111 999
2.3 Safety instructions
Always observe the following safety instructions and regulations.
d Danger!
Inflammable mixtures of gas and air may explode. Do not
use or store explosive or easily flammable substances
such as petrol or paint in the same room as the appliance.
d Danger!
Risk of poisoning and explosion due to a malfunc-
tion. Never put the safety devices out of operation
or tamper with them so as to impair their function.
2.4 Modifications in and around the boiler
No modifications may be made to the following items:
- The boiler
- The gas, water and electrical supply
- The flue system
- The safety valve for the heating water
- Any structural changes around the appliance that
could affect the operational safety of the boiler.
a Caution!
Inappropriate modifications can cause damage.
Never tamper with the boiler or other parts of
the system. Never attempt to perform mainte-
nance or repairs yourself.
- Do not damage or remove seals on components. Only
authorised engineers or our customer service may
remove sealed components.
H Danger!
Risk of scalding. The water coming out of the
tap can be very hot.
a Caution!
Risk of damage. Do not use sprays, solvents,
chlorinated cleaning agents, paint, adhesives
or similar substances in the vicinity of the
appliance. These substances can cause
corrosion, including the flue system.
2.5 Installation and setting
a Caution!
The appliance must be installed and serviced by
a Competent Person as stated in the Gas Safety
(Installation and Use) Regulations 1998. In IE,
the installation must be in accordance with the
current edition of I.S.813 ‘Domestic Gas Instal-
lations’, the current Building Regulations and
reference should be made to the current ETCI
rules for electrical installation.
a Caution!
The appliance may only be operated with its
case properly and permanently closed. Other-
wise, in unfavourable conditions, material
damage or even injury or death can result.
Frost protection
Your boiler is equipped with a frost protection function:
If the heating water temperature drops below 5°C when
the electrical supply to the boiler is on, then the boiler goes
into operation and heats the boiler circuit to approx. 30°C.
h Note!
It cannot be guaranteed that water will circu-
late throughout the entire heating system.
If the boiler is not operated for several hours during
very cold weather there is the possibility of the system
freezing. Please ensure that if you are absent during a
period of frost the central heating remains in operation
and all rooms are kept above free-zing point. It must be
remembered, however, that the boiler will be automati-
cally switched off by the built in monitoring devices if
certain faults occur, e.g. interruption in the gas or
electricity supply or faults in the flue gas system. To
overcome this possibility you can drain both the central
heating system and boiler.
h Note!
Frost protection and monitoring devices can
only function when the electrical supply to the
boiler is on.
2 Safety