Operation 4
0020230534_02
ecoFIT
pure
Operating
instructions
11
Applicability:
Product with connected domestic hot
water cylinder
▶
Open the cold water stop valve.
4.6 Starting up the product
▶
Only start up the product once the cas-
ing has been completely closed.
4.7 Switching on the product
▶
Switch on the product via the main
switch installed on-site.
4.8 Setting the heating flow
temperature
1. Press
( ).
◁
The target value of the heating flow
temperature appears on the display.
Note
The competent person may
have adjusted the maximum
possible temperature.
Conditions
: No controller connected
▶
Use
or
to set the required heating
flow temperature.
▶
Confirm by pressing
.
Conditions
: Controller connected
▶
Set the maximum possible heating flow
temperature on the product.
▶
Confirm by pressing
.
▶
Set the required heating flow temperat-
ure on the controller (
→
Controller oper-
ating instructions).
4.9 Setting the hot water
temperature
Warning.
Risk of being scalded by hot
water.
To protect against Legionella,
the hot water can be heated up
to above 60 °C at pre-defined
times.
▶
Have a competent person
inform you about the meas-
ures that should be taken to
protect against Legionella in
your system.
1. Press
(
).
◁
The set hot water temperature
flashes in the display.
Conditions
: No controller connected
▶
Change the hot water temperature by
pressing
or
.
▶
Confirm by pressing
.
Conditions
: Controller connected
▶
Use
to set the maximum possible hot
water temperature on the product.
▶
Confirm by pressing
.
▶
Set the required hot water temperature
on the controller (
→
Controller operating
instructions).
4.10 Switching off the product's
functions
4.10.1 Switching off heating mode
(Summer mode)
1. To switch off heating mode without
switching off the hot water generation,
press
( ).
◁
The value of the heating flow tem-
perature appears in the display.
2. Use the
button to set the heating
flow temperature to
Off
.
