Vaillant auroSTOR, Руководство по эксплуатации и установке

Страница: 10 / 20

Operating and Installation Manual for uniSTOR, auroSTOR, geoSTOR Cylinders 0020080043_00
10
• Remove the top pad and the cardboard sleeve carton.
• Pull the cylinder on the bottom pad over the edge of
the pallet until you can break off the bottom pad at
the intended point with your foot.
• Position the hand cart in front of the pallet and load
the cylinder on to it.
5.3.3 Transport without cladding
1
Fig. 5.7 Removing the top cap and covers
• Remove the top cap from the cylinder.
• Pull the two covers (
1 ) off the front of the cylinder.
300l variant:
1
Fig. 5.8 Releasing the jacket
• Unfasten the 6 screws (1) at the rear of the cylinder.
• Take the jacket in your hand and walk once round the
tank so that the jacket rolls up.
400l and 500l variants:
1
Fig. 5.9 Releasing the jacket
5 Installation