16
Operating manual atmoCRAFT
4.11.3 Chimney sweep measurements
Note!
The measurement and checking work should be
carried out only by the chimney sweep.
7
6
Fig. 4.17 Switch on the chimney sweep mode
Proceed as follows to perform the measurements:
• Activate the chimney sweep mode by simultaneously
pushing the buttons "
+
" (
6
) and "
-
" (
7
) on the DIA System.
• The measurements should be taken at the earliest after
2 minutes of operation of the unit.
• By simultaneous pushing of buttons "
+
" (
6
) and "
-
"
(
7
) you can exit the measuring mode. The measuring
mode will also be ended if no button is pushed within
a 15 minute period.
4 Operation
