Vaillant aroTHERM Series, Руководство по эксплуатации

Страница: 47 / 212

Operation 4
0020257297_02 aroTHERM Operating instructions
45
3.4 Data plate and serial number
The data plate is located on the right-hand side of the pro-
duct's exterior.
The data plate includes the nomenclature and the serial
number.
3.5 CE marking
The CE marking shows that the products comply with the
basic requirements of the applicable directives as stated on
the data plate.
The declaration of conformity can be viewed at the manufac-
turer's site.
3.6 Fluorinated greenhouse gases
The product contains fluorinated greenhouse gases.
4 Operation
4.1 Switching on the product
▶
Switch on the disconnector (circuit breaker) to which the
product is connected in the building.
4.2 Operating the product
The control for the indoor unit provides information about the
operating mode, and is used to set parameters and eliminate
faults.
▶
Go to the indoor unit. Follow the operating instructions for
the indoor unit.
Condition : System control present
The system control controls the heating installation and do-
mestic hot water generation of a connected domestic hot wa-
ter cylinder.
▶
Go to the system control. Follow the operating instruc-
tions for the system control.
4.3 Guaranteeing frost protection
1. Ensure that the product is switched on and remains
switched on.
2. Ensure that no snow accumulates around the air inlet
and air outlet.
4.4 Switching off the product
1. Switch off the disconnector (circuit breaker) to which the
product is connected in the building.
2. Note that this means that frost protection is no longer
guaranteed.
5 Care and maintenance
5.1 Keeping the product clear, cleaning the
product
1. Regularly remove branches and leaves that have
gathered around the product.
2. Regularly remove leaves and dirt from the ventilation
grille below the product.
3. Regularly remove snow from the air inlet grille and from
the air outlet grille.
4. Regularly remove snow that has gathered around the
product.
5.2 Caring for the product
▶
Clean the casing with a damp cloth and a little solvent-
free soap.
▶
Do not use sprays, scouring agents, detergents, solvents
or cleaning agents that contain chlorine.
5.3 Maintenance
Applicability: Except Great Britain
An annual inspection and biennial maintenance of the
product carried out by a competent person is a prerequisite
for ensuring that the product is permanently ready and
safe for operation, reliable, and has a long service life. The
inspection may require maintenance to be carried out earlier,
depending on the results.
Applicability: Great Britain
An annual inspection of the product carried out by a compet-
ent person is a prerequisite for ensuring that the product is
permanently ready and safe for operation, reliable, and has a
long working life.
5.4 Observing the maintenance plan
▶
Observe the maintenance plan (
→
Installation instruc-
tions, appendix). Comply with the intervals.
Danger!
Risk of injury and risk of material damage
due to neglected or incorrect maintenance
and repairs.
Neglected or incorrect maintenance work or
repairs may lead to personal injury or dam-
age to the product.
▶
Never attempt to carry out maintenance
work or repairs on the product.
▶
Employ an authorised installation com-
pany to complete such work. We recom-
mend making a maintenance contract.