5 Start-up and operation
14
Operating instructions Remote Control for VED/8 0020288447_00
4.4 Control elements and display
eco
MEMO
+
–
°C
max. 42 °C
1
2
3
4
1
Information
/menu item
2
Selected water
temperature,
available menu
items, selection
options
3
Current assign-
ment of the se-
lection buttons
4
Selection but-
tons
4.5 Button functions
Button as-
signment
Function
+
and
−
–
Setting the domestic hot
water temperature
–
Changing the set value
▲
and
▼
–
Scrolling in the menu
+
and
−
at the
same time for
longer than
three seconds.
–
Activating and deactivat-
ing the button lock
+
and
−
briefly
at the same
time
–
Temporarily activating the
comfort temperature
MEMO
and
eco
at the
same time
–
Calling up the menu
MEMO
–
Calling up saved temper-
ature values
eco
–
Activating/deactivating the
eco function
Reset
–
Resetting the consump-
tion values
←
–
Going one selection level
higher
OK
–
Going one selection level
lower
–
Confirming the setting
Saving
–
Saving desired temperat-
ure
The current function of the buttons is
shown in the display.
You must always confirm a change to a
value. Only then is the new setting saved.
You can use
←
to cancel a process at any
time.
The appendix contains an overview of the
end user level menus.
End user level menu overview (
→
Page 17)
5 Start-up and operation
5.1 Calling up the installer level
menu
▶
Press and hold
MEMO
for longer than
three seconds.
Installer level menu overview
(
→
Page 17)
5.2 Connecting the remote control
The remote control included in the scope
of delivery is connected to the product at
the factory. You can connect up to three
further remote controls to the product
at the same time. As soon as a remote
control is connected to the product, it ini-
tially adopts the settings from the product.
The settings can then be changed at the
remote control and on the product.
▶
Ensure that the remote control is ready
for operation (batteries are inserted and
the housing is night closed tightly).
▶
Press any button on the remote control.
▶
Press
Start
on the remote control.
◁
The product's display shows a re-
quest to connect.
▶
Confirm the connection on the product's
control panel.
▶
Confirm the connection to the remote
control.
◁
Both displays switch to the temperat-
ure display.