20
3.
GPS Box Configuration – System Configuration:
3.1.
Calibrating touch and setting the image:
When starting the vehicle, it will appear on its screen, the OEM original menu image:
Don’t insert the SD Card map yet,
Push briefly the
NAV button from the MMI panel.
To enter
NAVI
mode, Screen’s
image will change and it’s going to show
NAVI mode (GPS Box)
image, wait some seconds, until appears calibration
image:
Push this cursor “+” on the touch screen, once pushed the + cursor, it will change its position, push it in every zone of
the screen where it appears until you receive “OK” message, at this way you will have calibrated successfully the
touch screen gps function, if it doesn’t appears “OK” message, you must repeat this process again. Once you have
done the calibration process it will appear this message “Unable to find navigation software”, push on this message
to omit it.
Then you must config. the multimedia interface,
push the
Menu
button of the multimedia interface’s remote
control to enter to the
basic settings menu,
use
▲
or
▼
of the remote control to move to
OSD
and push
OK,
now
push
OK
on
LANGUAGE,
use
▲
or
▼
buttons of the remote control to select the English language, and push
OK
to
confirm your selection, then push the
Menu
button of the remote control until the basic settings menu disappears.
