vaetrix e Gauge 1, Руководство по эксплуатации, Страница: 4 / 24

OPERATION
The eGauge is initiated by pushing the ON/OFF key.
When the button is pushed there will be a “Snap”
or tactile response, no further force is necessary to
stimulate the gauge to respond. When the gauge is
turned on the screen shown to the right will appear
on the eGauge. The initialize screen will show the
current date and time and current firmware revision.
The second screen will display
Full Scale Pressure
,
eGauge Serial Number , Last Calibration Date ,
and
Current Update Rate
.
When “MENUS” is displayed, two menus are displayed
as the screen below shows.
The two menu’s available are
Pressure Units
Enabled and the Gauge Update Rate . To select
a menu, use the “NEXT” and “PREV” buttons to
navigate to the desired menu. Once the menu has
been selected, press “SEL” to display it. The screen
to the right shows the Pressure Units which are
enabled. To navigate to a unit, use the “NEXT” and
“PREV” buttons. When a unit is selected it will flash.
The “SEL” button will toggle the value either “Y” or
“N”. When all of the desired units have been enabled
or disabled, press the “EXIT” button to return to the
top menu. The default from the factory is all units
are enabled.
4