vaetrix e Gauge 1, Руководство по эксплуатации, Страница: 22 / 24

REPORTS
AUTO OFF
DAMPING
HELP
UPDATES
Tabulated Data
The user can view the tabulated data used to generate the graph.
The
AUTO OFF
or inactivity timer function can be
enabled
or
disabled
. If there is a
check mark beside Auto Off, then it is enabled, if no check mark, Auto Off is disabled.
When unit leaves factory, Auto Off is disabled. When the
AUTO OFF
feature is
enabled
,
the unit will automatically power down after 15 minutes if no activity is detected from the
keys on the gauge face.
This feature is used to maximize battery life. This function is
automatically disabled in the Log Mode.
The DAMPING function can be
enabled
or
disabled
. If there is check mark beside
Damping, then it is enabled, if no check mark, function is disabled. When units leave
factory, Damping is enabled. If the Damping is enabled, the pressure readings are
averaged against the previous reading before it is used to update the display and the
display is updated four times per second.
About
This command shows the current version of Vaetrix Plot.
Make sure to check the JM Test Systems website for software updates. Please contact
JM Test Systems Tech Support for any software or firmware updates needed.
22